• In stage 1, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stage 2, water travel throughNitrate-Selective Resin. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels. The capacity is 3000 ppm of nitrates as CaCO3. To determine capacity, first calculate the ppm of nitrates as CaCO3, then divide that number into 3000 to get the gallons. This cartridge can be regenerated using sodium chloride brine.Click here for product data
• In stage 4, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.
• In stages 3 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.  
• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

CQE-CT-00160 CQE-CT-00157
Dimensions: 5"L x 13"H x 5"W
Recommended flow rate: below 0.5 GPM

• In stage 1, water travel through anNitrate-Selective Resin Cartridge, designed specifically for reducing Nitrate. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels.Click here for product data Capacity is 5500 ppm of nitrates as CaCO3. To determine capacity, first calculate the ppm of nitrates as CaCO3, then divide that number into 5500 to get the gallons. This cartridge can be regenerated using sodium chloride brine.

• Multi Stage Cartridge:

• In stage 2 and 7, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stages 3 and 4, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction(Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

• In stage 5, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.

• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

• Recommended flow rate: below 0.5 GPM.

• Sits on the counter and easily connects to any kitchen faucet.

• A diverter valve switches between filtered and unfiltered water.

CQE-CT-00154 CQE-CT-00158
Dimensions: 10"L x 13"H x 5"W
Recommended flow rate: below 0.5 GPM

• In stage 1, water travels through a 5 Micron Carbon Block Cartridge for removing volatile organic carbon compounds (VOC's, insecticides, pesticides and industrial solvents).

• In stage 2, water travel through anNitrate-Selective Resin Cartridge, designed specifically for reducing Nitrate. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels.Click here for product data Capacity is 5500 ppm of nitrates as CaCO3. To determine capacity, first calculate the ppm of nitrates as CaCO3, then divide that number into 5500 to get the gallons. This cartridge can be regenerated using sodium chloride brine.

• Multi Stage Cartridge:

• In stage 3 and 8, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stages 4 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

• In stage 6, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.

• In stages 7, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

• Recommended flow rate: below 0.5 GPM.

• Sits on the counter and easily connects to any kitchen faucet.

• A diverter valve switches between filtered and unfiltered water.

CQE-CT-00155 CQE-CT-00159
Dimensions: 15"L x 13"H x 5"W
Recommended flow rate: below 0.5 GPM

Optional Refrigerator / Ice maker hook up

CQE-US-00322
Dimensions: 5"L x 5"W x 16"H (10" +4" to Change Filter) -  Weight: 10 lbs

• In stage 1, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stage 2, water travel through Nitrate-selective resin REMOVAL resin. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels. The capacity is 3000 ppm of nitrates as CaCO3. To determine capacity, first calculate the ppm of nitrates as CaCO3, then divide that number into 3000 to get the gallons. This cartridge can be regenerated using sodium chloride brine.Click here for product data
• In stage 4, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.
• In stages 3 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.
• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

Optional Refrigerator / Ice maker hook up

CQE-US-00323
Dimensions: 5"L x 10"W x 16"H (10" +4" to Change Filter) -  Weight: 13 lbs

• In stage 1, water travel through anNitrate-Selective Resin Cartridge, designed specifically for reducing Nitrate. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels.Click here for product data Capacity is 5500 ppm of nitrates as CaCO3. To determine capacity, first calculate the ppm of nitrates as CaCO3, then divide that number into 5500 to get the gallons. This cartridge can be regenerated using sodium chloride brine.

• Multi Stage Cartridge:

• In stage 2 and 7, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stages 3 and 4, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction(Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

• In stage 5, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.

• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

• Recommended flow rate: below 0.5 GPM.

Optional Refrigerator / Ice maker hook up

CQE-US-00324
Dimensions: 5"L x 15"W x 16"H (10" +4" to Change Filter) -  Weight: 16 lbs

• In stage 1, water travels through a 5 Micron Carbon Block Cartridge for removing volatile organic carbon compounds (VOC's, insecticides, pesticides and industrial solvents).

• In stage 2, water travel through anNitrate-Selective Resin Cartridge, designed specifically for reducing Nitrate. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels.Click here for product data Capacity is 5500 ppm of nitrates as CaCO3. To determine capacity, first calculate the ppm of nitrates as CaCO3, then divide that number into 5500 to get the gallons. This cartridge can be regenerated using sodium chloride brine.

• Multi Stage Cartridge:

• In stage 3 and 8, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stages 4 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

• In stage 6, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.

• In stages 7, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.

• Recommended flow rate: below 0.5 GPM.

CQE-RF-00707
Dimensions: 5"L x 5"W x 16"H (10" +4" to Change Filter)  - Weight: 6 lbs

• In stage 1, and 7 water water flows through pre and post one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

• In stage 2, water travel through Nitrate-selective resin REMOVAL resin. Nitrate reduction is 90% to 95% and breakthrough is not affected by sulfate levels. The capacity is 3000 ppm of nitrates as CaCO3. To determine capacity, first calculate the ppm of nitrates as CaCO3, then divide that number into 3000 to get the gallons. This cartridge can be regenerated using sodium chloride brine.Click here for product data
• In stage 4, water flows through ion exchange resins, reducing heavy metals such as lead, copper, aluminum, and water hardness.
• In stages 3 and 5, water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc (ERA-6500, ERA-9500). ERA-6500 and ERA-9500 are major advancements in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (Eagle Redox Alloy®) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.
• In stages 6, water flows through granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's), PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water causing bad taste and odors in your drinking water.